727 manual valve body install






















TCI® Torqueflite Manual/Automatic Valve Body This valve body can be installed in a few hours by carefully following directions. Read all instructions first to . 1. Remove park rod and clip from original valve body, re-install park rod and clip on new valve body. 2. Remove and discard accumulator spring. 3. Check for restrictor plug in front clutch apply hole of case. (see Figure 1) Remove restrictor if one is present 4. NOTICE Re-install new valve body, torque new mounting bolts to in/lbs. 5. Adjust bands. STEP 12 Before lifting new Valve Body into transmission, place manual valve into it using the manual valve from your old valve body. STEP 13 Lift Valve Body and Spacer to Valve Body Gasket (small gasket) up into place being sure to line up gear shift selector pin. Start all bolts making sure valve body is in its proper location.


just start burnout in 2nd www.doorway.ru dont get in and out of throttle in 1st gear if it is a and if you ever break a drive line part in 1st www.doorway.ru the launch you need to inspect the sprag in the trans which is true for any valve body in use. 1. Remove park rod and clip from original valve body, re-install park rod and clip on new valve body. 2. Remove and discard accumulator spring. 3. Check for restrictor plug in front clutch apply hole of case. (see Figure 1) Remove restrictor if one is present 4. NOTICE Re-install new valve body, torque new mounting bolts to in/lbs. 5. Adjust bands. Cheetah Xtreme Action Valve Body. Fits: A, , A, A Forward Pattern.


I will need to change the valve body in my , how hard is it to do Work the manual lever shaft and electrical connector out of the. Install the New manual valve alignment, instructions page 2. Turbo Performance Transmission Auto/Manual Valve Body A A A A A Here's the install instructions for those parties who are interested: TF TF Competition Reverse Pattern Valve Body Instructions.

0コメント

  • 1000 / 1000